FABSIGN LED V1.0.0 Official User Manual
The engine button Official manual, the site footer, and checkout all open this page.
| Language | Live |
|---|---|
| 한국어 | Open |
| English | Open |
| 日本語 | Open |
| 中文 | Open |
| Español | Open |
| Français | Open |
| Deutsch | Open |
| Tiếng Việt | Open |
Design on the left. Look on the right. Text in backticks is the exact label on screen.
🗺 Screen map
| Where | On-screen label | You use it to |
|---|---|---|
| Top bar | 📁 File · 🛠️ Edit / View · 📦 Export · ❓ Help | SVG, view, STL/3MF, wiki |
| Top of the left panel | Register Pro License | Type a key |
| Top of the left panel | 🔄 Refresh License | Unlock Pro after checkout |
| Top of the left panel | Version & updates | Check the installer |
| Left panel | Language | UI language |
| Left panel | Basic Text & Size | Mode, text, SVG, size |
| Left panel | Detailed Structure | Height, holes, LED, tolerance, auto sizes |
| Left panel | Manual Thickness / Parts | Thickness and scale of the selection |
| Left buttons | 3D VIEW · Export STL · Export 3MF | Preview and save |
| Bottom of the left panel | Cost Calculator | Costs and 💾 PDF |
| Right toolbar | Viewport | Showcase, lid, tools |
Right toolbar buttons:
📷 Save Render for #discount-claims (50% OFF 12-Month Annual Plan) · 📦 Assemble Lid · Move / Select · Hole · Bridge · Edit Hole Positions · Reset Design Canvas
Hint: Shift+click multi-select · Manual bridge: drag to link, click to delete
F11 hides the panel. G toggles the grid.
Panels, menus, right-click, shortcuts
Resize with the mouse
Drag the bar between the left controls and the 3D view. The cursor is sb_h_double_arrow. The left panel uses one vertical scrollbar from the settings through the cost calculator. Ctrl+0 restores the default width. The position is saved in %LOCALAPPDATA%\FABSIGN_LED. Labels rewrap to the live inner width so text is not cut off.
Top bar
The dark top bar is the menu. Viewport tools stay above the 3D view. The right side shows the license badge, license refresh, and update. Language stays at the top of the left panel. STL and 3MF stay as the large buttons above the cost calculator. Scroll the left panel to reach the cost calculator. Free mode still shares 3 saves across STL and 3MF.
| Menu | What is inside |
|---|---|
| 📁 File | Load SVG Ctrl+O, reset the canvas, cost PDF Ctrl+P, restore panels Ctrl+0, save/open project, add font, exit |
| 🛠️ Edit / View | Move/Select, Hole, Edit hole positions, Bridge, neon light Ctrl+L, switch Cap ↔ Flex neon, auto bridge, reset thickness/scale, grid G, dark/light, hide UI F11 |
| 📦 Export | Refresh 3D VIEW F5, create STL Ctrl+E, export 3MF Ctrl+M, showcase render Ctrl+Shift+S |
| ❓ Help | This manual F1, refresh license Ctrl+R, check for updates, Discord 50% discount, FAQ, version |
Right-click quick menu
The menu opens only when you release the right button within 4 px of the press. A longer right-drag still orbits or pans the camera.
| Group | Commands |
|---|---|
| 1 Preview / light | Refresh 3D VIEW F5, neon light Ctrl+L, switch Cap channel ↔ Flex neon |
| 2 Edit tools | Move/Select, Hole, Edit hole positions, Bridge |
| 3 Parts / bridges | Apply auto bridges, reset selected thickness/scale, load SVG Ctrl+O, reset canvas |
| 4 View / panels | Grid G, dark/light background, restore panels Ctrl+0, hide UI F11 |
| 5 Export & discount | STL Ctrl+E, 3MF Ctrl+M, cost PDF Ctrl+P, showcase render Ctrl+Shift+S |
Shortcut table
| Key | Action |
|---|---|
F5 | Refresh 3D VIEW |
Ctrl+O | Load SVG |
Ctrl+E | Create 3D STL (.stl) |
Ctrl+M | Export 3MF (.3mf) |
Ctrl+P | Save the cost estimate PDF |
Ctrl+Shift+S | Save Render for #discount-claims (50% OFF 12-Month Annual Plan) |
Ctrl+L | Toggle the neon light |
Ctrl+R | Refresh the license |
Ctrl+0 | Restore default panel sizes |
G | Toggle the grid. Ignored while typing in a field |
F11 | Hide or show the left panel |
F1 | Open this manual in the current language |
G does not fire while the cursor is in a text field. Ctrl shortcuts still work with Caps Lock on. A 3D job that is already running will not start a second time.
🚀 Phase 1 — Language, showcase, 50% off
1. Language
- Open
Languageon the left. - Choose
English. The UI switches at once. - Site and wiki links stay on
/en/.
2. Showcase PNG
- Enter text or an SVG.
- Press
3D VIEW. - Press
📷 Save Render for #discount-claims (50% OFF 12-Month Annual Plan). - Save a PNG. Grid and axes are omitted. The image is 2×.
If the 3D view is closed: Open 3D VIEW first, then save the showcase render.
On the free plan, Export STL and Export 3MF share 3 successful saves. After 0/3, the next click opens Pro checkout. 📸 Capture this 3D view and get 50% off the 12-Month Annual Plan on Discord saves the same PNG.
3. The Discord code
A normal image upload does not issue a code.
- Join Discord and open
#discount-claims. - Type
/showcaseand attach the image. The work is posted automatically in#🌈work-gallery. - Click the bot button
[🔒 Claim 50% Code]. The 50% code is issued automatically. - You receive
FAB100-XXXXXX. - Paste it on checkout. 50% applies at once.
The first 100 completed Pro payments get 50% off by default. Toss and Paddle both switch to the regular price when that count is reached or an admin closes the offer. A FAB100 code does not restore the discount after the cap.
6. 💡 How to get the 50% code for free repeats these three steps. ✕ Remove discount clears it.
⚠️ The 50% discount is for the 12-Month Annual Plan only. It does not apply to the 1-month (30-day) plan.
After the save: Go to checkout · Open Discord invite · VIP archive · Official manual
Free trial, then Pro
Design, the cost calculator 💾 PDF, and showcase captures do not use the export count.
| Step | What you see |
|---|---|
| 1. Free trial | The license line reads Free · STL/3MF trial 3/3 left. Export STL and Export 3MF share one counter. A file counts only after .stl or .3mf is saved. |
| 2. After 3 | At 0/3, the next click does not write a file. Pro checkout opens, with 📸 Capture this 3D view and get 50% off the 12-Month Annual Plan on Discord. |
| 3. 50% code | Join Discord, attach the image with /showcase in #discount-claims, then click [🔒 Claim 50% Code]. The code FAB100-XXXXXX is issued automatically, and the work is posted in #🌈work-gallery. |
| 4. Unlock | After payment, press 🔄 Refresh License. Pro opens, and STL & 3MF export is unlimited. |
✍️ Phase 2 — Sign mode, text, SVG
The top of Basic Text & Size is Sign mode.
| Mode | On screen | Files | Use |
|---|---|---|---|
| Cap channel | Cap channel | {name}_Base.stl + {name}_Lid.stl + {name}_Info.txt | Plug-in channel letters |
| Flex neon | Flex neon | {name}_Base.stl + {name}_Info.txt | Open trench. No lid |
3D text
- Type in
Text. The preview updates when you pause. - Pick a bold face in
3D Text Font. A thin font warns that it may break. - The small combo left of the font list filters by language.
ALLlists every font. [ + ]→ language (KR / EN / JP / CN / VN) → TTF/OTF. External fonts need Pro.[ - ]deletes only fonts you added. Bundled Google/OFL fonts stay.Spacing (mm)·Letter Height (mm)·Total Width (mm)Parts Onmakes dots and detached strokes separate objects. ThenMove Partsand drag.
Default spacing multipliers: Hangul 1.5, Latin 1.3. Override them in Spacing (mm).
File → Save Project / Open Project keeps the font hash.
SVG logo
📁 Load SVG- Only
.svgopens. - Python reads the paths and builds polygons. OpenSCAD
importis never used. SVG Loaded: {name}→ clear with✕- If nothing is filled:
No filled paths found in this SVG.
If an O trench is blocked, turn on Fill Inner Holes in Detailed Structure.
In neon, 💡 Neon Light On (Simulation) plus one of 10 chips. The channel stays matte. Only the strip glows. This is a preview, not an optical calculation.
📐 Phase 3 — Smart auto sizes
S is the long side: the largest of Total Width (mm), the rendered width, and Letter Height (mm).
As S grows, the outer wall, upper wall, floor, and lip get thicker. The cap face stays 1.5 mm. The default Fit Tolerance (mm) is 0.30, added on the lid only.
Live readout inside Detailed Structure:
[Auto] wall 2.0 · top 1.0 · floor 2.0 mm
ledge 1.0 · lip 5.0 · gap 0.3 mm
| Token | Meaning |
|---|---|
wall | Outer wall |
top | Upper wall |
floor | Floor |
ledge | Step (wall − top) |
lip | Interlock depth |
gap | Fit clearance |
How S reinforces the body
Anchors are ≤ 300 mm, 600 mm, and 1000 mm. Values move in a straight line between them and hold at the 1000 mm row after that.
| S | Wall | Top | Ledge | Floor | Lip | Cap face | Default gap |
|---|---|---|---|---|---|---|---|
| ≤ 300 mm | 2.0 | 1.0 | 1.0 | 2.0 | 5.0 | 1.5 | 0.30 |
| 600 mm | 2.8 | 1.4 | 1.4 | 2.5 | 6.5 | 1.5 | 0.30 |
| 1000 mm+ | 3.6 | 1.8 | 1.8 | 3.0 | 8.0 | 1.5 | 0.30 |
Millimetres.
Lip depth never exceeds body height − floor − LED width − 1.2 mm. A thin stroke shrinks the wall by its inscribed radius so the light cavity and the lid opening stay open. Below the manufacturable size, the status line says Min manufacturable scale applied.
| Field | Cap channel | Flex neon |
|---|---|---|
| Height | Body Height (mm), default 35 | Neon Depth (mm), default 12 |
| Light | LED Strip Width (mm), default 8 | Neon Width (mm), default 6 |
| Fit | Fit Tolerance (mm) 0.30 · Base Friction (mm) 0.10 | Covered rear bridges, max 45° |
For handoff, set Backplate to Cloud or None.
Stroke Links
Auto Bridgesjoins detached strokes such as the dot oni. You do not draw them.Manual Bridges: drag with theBridgetool. Click a link to delete it.
Parts past about 220 mm turn red in the preview. ✂️ Split & Save Per Letter (when over bed) writes one STL set per letter. Text only. Pro only. Spaces are skipped.
💰 Phase 4 — Cost Calculator
Scroll the left panel to Cost Calculator. These numbers are a shop reference, not an invoice.
Before an STL exists, amounts stay —. After a geometry change: Geometry changed — export .stl or .3mf again to refresh the estimate.
| Field | Default when the UI is English |
|---|---|
Material | PLA 1.24 · ABS 1.04 · PETG 1.27 g/cm³ · Other |
Price / 1kg ($) | about 16.30 (22,000 KRW) |
LED Price / 1m ($) | about 2.22 (3,000 KRW) |
Labor / margin ($) | 0 |
Print rate ($/hr) | about 3.70 (5,000 KRW) |
Switching language redisplays the same KRW base as $ ¥ € ₫ 원.
- Filament = volume (cm³) × density × (price per kg / 1000)
- LED = contour (m) × 1.10 × price per m
- Labor = the fixed amount you type
- Print = (weight g ÷ 15 g/h) × hourly rate
- Estimated total = 1 + 2 + 3 + 4
A non-manifold mesh falls back to bbox × 0.3.
💾 PDF saves Cost Estimate: an item/value table, not a payment document.
📦 Phase 5 — STL and multipart .3mf
Export STL | Export 3MF | |
|---|---|---|
| Cap channel | Base, Lid, Info as separate files | Base + Lid as two parts in one .3mf |
| Flex neon | Base + Info | Base only |
| Placement | You place them in the slicer | Lid sits sign width + 10 mm to the right, Y centers aligned, Z = 0 |
| Free plan | 3 combined saves of .stl or .3mf | Same counter |
Then 📂 Open Folder or 🚀 Open in 3D Slicer. The app remembers Bambu, Prusa, Orca, and Cura.
Why [Yes] still keeps them side by side
Drop the .3mf on Bambu Studio or OrcaSlicer. The slicer asks whether to open the objects as a project. Press Yes. The 10 mm gap stays.
The gap is not a transform matrix. The lid coordinates are already inside the mesh vertices. If the slicer drops matrices, the lid is still to the right of the body. When they are already side by side, you do not need auto-arrange to separate them.
| Mode | Send these |
|---|---|
| Cap channel | {name}_Base.stl · {name}_Lid.stl · {name}_Info.txt |
| Flex neon | {name}_Base.stl · {name}_Info.txt |
| Per letter | Numbered Base/Lid plus one Info |
| One plate | {name}.3mf |
After payment, VIP archive confirms your email and promo code and gives the master calibration .3mf. Register a certified workshop on that page.
🛠 Bridges and manual edits
| Goal | Do this |
|---|---|
| Move | Move / Select, drag or arrow keys. Shift+arrows go farther |
| Multi-select | Shift+click |
| Cap holes | Hole only. The position editor stays hidden. Click the letter on the main 2D canvas. |
| Neon holes | Hole and Edit Hole Positions both open the Hole Position Editor. |
| Manual link | Manual Bridges + drag Bridge |
| Thickness | Manual Thickness / Parts → Apply |
| Part scale | Parts On, then Apply Parts |
| Lid check | 📦 Assemble Lid |
| Clear | Reset Design Canvas |
Hole tools by mode, and the flex-neon loupe
The desktop app UI supports 15 languages. This manual is published in 8; any other app language, including Portuguese, opens this English page. Free mode shares 3 saves across STL and 3MF. Pro unlocks unlimited STL and 3MF.
Cap channel shows only Hole on the viewport bar. Click the main 2D canvas to place the hole. Flex neon blocks that direct click. Hole in the bar, the Edit menu, or the right-click menu opens the Hole Position Editor immediately, and so does Edit Hole Positions.
The editor opens at 1000×720 and can be resized. The neon trench fills the view. Geometry is cached when the window opens. A 3.5× loupe follows the cursor with a crosshair and a circle the size of Hole Ø. The circle is cyan-green when the hole sits inside the trench and is not wider than the trench. It turns red when the hole leaves the trench or is wider than it. The wheel zooms from 100% to 500%. Right-click or middle-drag pans. 🔍+, 🔍-, 1:1, and 🔎 Loupe ON/OFF are on the toolbar. A click at any zoom maps back to the same SCAD (x, y) used by 3D VIEW, .stl, and .3mf.
❓ FAQ
Pro right after payment
- Leave the engine open.
- Press
🔄 Refresh License. - As soon as the server answers:
Pro is unlocked on this PC.No second login. No restart.
If the checkout URL had no hwid, refresh still sends the signed-in email or session. The server writes this PC only onto an active row whose hwid_mac is empty.
Still free: This PC is still on the free plan. Finish checkout, then refresh again.
One PC
One license stays on one PC (hwid_mac). Refresh will not take a seat that already belongs to another PC.
| Code | Meaning | What to do |
|---|---|---|
ALREADY_BOUND | Already on another PC | Use that PC, or ask support to move the seat. Aliases: ALREADY_REGISTERED DEVICE_BOUND HWID_MISMATCH |
INVALID_KEY | Not a paid key | Check the email, then Register Pro License |
INACTIVE | Subscription not active | Finish payment, or write support with the same email |
EXPIRED | Expired | Contact support |
EMPTY | No key | Enter the key |
NETWORK | Server unreachable | Check the connection and refresh |
RATE | Too many requests | Wait, then retry |
A key that the server reports as refunded, canceled or expired is released automatically when you press 🔄 Refresh License or when the app verifies it at startup, and this PC returns to Free. There is no manual reset-license button.
Print and preview
| Symptom | Check |
|---|---|
| 3D engine missing | Reinstall so _internal/openscad_portable is present. System OpenSCAD is not used. |
| Export blocked | Free plan: 3 combined STL & 3MF saves. The next click opens Pro checkout and the 50% showcase capture. Pro removes the limit. |
Estimate stays — | Run Export STL once so mesh volume exists. |
| Dot splits off | Auto Bridges. Without Pillow, only manual bridges work. |
Neon O is solid | Fill Inner Holes |
| Over ~220 mm | Shrink the sign, or use Pro per-letter split. The preview turns red. |
| Backplate | Handoff uses Cloud or None |
| Updates | Version & updates. A newer build shows 🚀 New update. |
In-app FAQ: Help → FAQ