Skip to main content

🖥️ 3D printer and system compatibility

The computer that runs FABSIGN LED and the machine that prints the STL are different. The application runs only on Windows. The print file is used as-is on an FDM printer and an STL slicer.

AreaSupportedNot supported
💻 Operating systemWindows 10, Windows 11Mac
🖨️ 3D printerAny FDM printer that prints STLNo printer brand is required by the app
🧩 SlicerAny slicer that opens STLNo dedicated slicer to install

💻 Operating system​

Mac is not supported

FABSIGN LED does not run on macOS. Install and run it only on Windows 10 or Windows 11.

Operating systemSupportNotes
🪟 Windows 10SupportedInstall and run
🪟 Windows 11SupportedInstall and run
🍎 macOSNot supportedNo Mac installer
Anything elseNot supportedOutside the current release

Download steps, and what to do if Windows shows a protection prompt, are in Install and start.

🖨️ 3D printers​

The generated file is an STL. It is compatible with any FDM 3D printer that can print STL. It is not a proprietary format for one brand. These are representative machines you can use immediately.

BrandExample machines
🟢Bambu LabX1, P1S, A1
🟠PrusaMK4, XL
🔵CrealityK1, Ender
🟣AnycubicFDM machines

An FDM printer that is not in the table still prints the same way if it accepts STL. Signs larger than the bed are printed from per-letter STL files. Placement and joints are in Large sign splitting. Starting speeds and temperatures are in High-speed profiles.

🧩 Slicers​

You do not install a new slicer. If the program you already use opens STL, load that file.

SlicerHow it connects
🟢 Bambu StudioOpen the STL from FABSIGN LED
🟠 PrusaSlicerOpen the STL from FABSIGN LED
🔵 CuraOpen the STL from FABSIGN LED
Any other slicerUse it unchanged if it supports STL

There is no required plugin and no converter. Confirm that the export format is STL.

✅ Check your setup​

  • The computer is Windows 10 or Windows 11, not a Mac
  • The printer is FDM and prints STL
  • The slicer is Bambu Studio, PrusaSlicer, or Cura, or another program that opens STL

If those three are true, you can print sign STL files in the setup you already have.